|Power Of Main Motor||30KW/37KW||37KW||45KW|
|Max. Vertical Stroke||1100||1350||1450|
|Max. Worktable Length||4000||3300||2500|
|Max. Worktable Width||2200||2300||2300|
This machine is applicable for cutting stone block into slabs and tiles, featured by precise cutting, high efficiency and easy operation. It can cut with combination of large, middle-size and small blades or single large blade, ideally used for cutting blocks.
Granite of medium rigidity: 200㎡ / 24h
Granite of hard rigidity: 110㎡ / 24h
Marble: 110-120㎡ / 24h( need some change on the machine)
Suggested Blade combination
QDQ2000: 2000mm+1800mm+1600mm+1400mm+1200mm+1000mm+800mm+600mm when cutting 85 cm high block
QDQ-2500: 2L+2M+2S, such as 2x2500mm+2x1800~2200mm+2x1000mm when cutting1.1m high block OR QDQ-2500, 2.5m/2.2m/2m/1.8m/1.4m/1.2m/1m/0.8m
QDQ-2800: 1L+1M+1S, such as 1x2800mm+1x2000mm(2200)+1x1200（1400）mm when cutting 1.25m high block
QDQ-3200: 1L, such as 3200mm when cutting 1.35mm high blockOther combinations are available, it depends on the block size
I. It is equipped with oil-immersed guide way for crossbeam and edge beam. while the slide track adopt dust proof to ensure the precise guide movement & long lifespan
II. Crossbeam is made of strong cast iron to avoid distortion after long term use.
III. It is equipped with hydraulic controlled elevation system. Blocks are cut automatically individually
IV. Blocks are cut directly on the ground or on block table as required, with blade input speed flexibly adjusted by variable frequency adjustable speed system according to slab character.
V. It is under computer control and works by program automatically.
VI. Easy operation but with high production
Sea worthy packaging, fully wrapped with waterproof membrane and air bubbles
Two units in one 40’ GP container
Delivery time :15-45 days from production and 1-2weeks from stock
Guaranty time for elements: half an year
Payment: 30% by T/T in advance as deposit, 70% upon dispatch